PrimaryCategory
Pulley Suppliers in UAE | V-Belt & Timing | Myra
Last updated: August 11, 2026
Pulley suppliers in UAE (Dubai, Sharjah, Ajman) with spec-checked sourcing for V-belt, timing, poly-V, and taper lock profiles. We quote based on profile, OD, groove count, bore, and balance requirements to confirm fit before supply and avoid drive mismatch.
Share pulley type, OD, face width, groove profile, and bore requirements for faster specification checks. We confirm groove geometry, taper series, and keyway details before supply.
V-belt, timing, poly-V, idler, and taper lock rangesDubai stock with project sourcing across the UAEMachining support for bores, keyways, and balancingOEM cross-reference and belt compatibility checksBalance checks for higher RPM drives
Trust signals
- Quotes same business day
- Specification checks before supply
- UAE supply coverage
Helpful Guides
Quick references for sizing, identification, and materials.
Pulley Size Calculation
Calculate OD, pitch diameter, and groove count for replacements.
Read guide ↗
Taper Lock Bush Size Chart
Match taper sizes to shaft diameters and hub series.
Read guide ↗
Pulley Groove Profiles: SPA, SPB, SPC vs Classical
Match pulley grooves to the correct V-belt section before ordering.
Read guide ↗
Taper Lock Pulley vs Finished Bore
Choose the mounting style that fits your shaft, maintenance, and stock strategy.
Read guide ↗
Idler vs Drive Pulley
Separate routing duty from torque-transfer duty when specifying pulleys.
Read guide ↗
Brand-Category Paths
Browse Brand-Specific Pulleys Options
Use these brand-category pages to compare capability fit before submitting your RFQ.
Fenner Pulleys
Supports buyers handling retrofit or replacement projects where pulley geometry must align with existing drives.
Open brand page ↗
Browning Pulleys
Useful for maintenance buyers needing quick validation for pulley/belt pairings and shaft-fit requirements.
Open brand page ↗
SIT Pulleys
Good fit for OEM and plant teams replacing pulley sets while preserving drive efficiency.
Open brand page ↗
RFQ Checklist
Send These Details for the Fastest Quote
- Type (V-belt / timing / taper-lock / poly-V / idler)
- OD, face width, and groove profile (SPA/SPB/SPC, etc.)
- Bore type (pilot or finished) + bore size if finished
- Keyway requirement
- Qty + application + belt profile if known
Pulley Types / Sub-Categories
Pulley Types We Supply
V-Belt Pulleys (SPZ, SPA, SPB, SPC, Classical)
Standard groove pulleys for classical and wedge V-belts in general industrial drives.
Typical Applications
- Compressors
- Fans
- Pumps
- Conveyors
- Mixers
- HVAC units
Common Profiles / Standards
- SPZ/SPA/SPB/SPC
- Classical A/B/C/D
- DIN 2211/2217
Timing Belt Pulleys (HTD, GT, T, AT)
Synchronous pulleys for precise, no-slip motion where timing accuracy is critical.
Typical Applications
- Packaging lines
- Automation
- CNC equipment
- Indexing tables
Common Profiles / Standards
- HTD 3M/5M/8M/14M
- GT/GT2 profiles
- T and AT profiles
Poly-V / Multi-Rib Pulleys
Compact, high-speed pulleys for multi-rib belts with smooth, efficient power transfer.
Typical Applications
- HVAC blowers
- Compressors
- Generators
- Compact drives
Common Profiles / Standards
- J/K/L/M rib profiles
- ISO 9982
Taper Lock Pulleys
Pulleys with standardized taper bushes for fast installation and accurate shaft fit.
Typical Applications
- Plant maintenance
- Retrofits
- OEM assemblies
- MRO replacements
Common Profiles / Standards
- Taper lock series 1008-5050
- Compatible with SPZ-SPC and A/B/C
Idler and Guide Pulleys
Routing and tensioning pulleys that maintain belt tracking and wrap angle.
Typical Applications
- Conveyors
- Material handling
- Belt tension systems
Common Profiles / Standards
- Flat, crowned, or grooved
- Bearing-integrated designs
Pulley Blocks
Sheave assemblies for lifting and rigging where mechanical advantage is required.
Typical Applications
- Construction lifts
- Marine rigging
- Workshop handling
Common Profiles / Standards
- Single or multi-sheave blocks
- Hook or shackle fittings
Custom / Machined Pulleys
Made-to-spec pulleys for non-standard profiles, bores, or dimensional constraints.
Typical Applications
- OEM machinery
- Retrofit projects
- Specialized conveyors
Common Profiles / Standards
- Custom groove geometry
- Balance grade to ISO 1940
Technical Specifications
Technical Specifications
| Parameter | Options / Notes |
|---|---|
| Materials | Cast iron (GG25), steel (C45), aluminum (6061/6082) |
| Bore options | Pilot bore, finished bore with keyway, taper lock bush |
| Groove profiles | SPZ/SPA/SPB/SPC, A/B/C/D, HTD/GT/T/AT, Poly-V J/K/L/M |
| Balancing standards | ISO 1940 balance grade G6.3 or per RPM |
| Belt compatibility | V-belts, timing belts, poly-V belts, flat belts |
| Standards | DIN 2211/2217, ISO 4183, ISO 9982 |
Product Catalogue
Industrial Pulley Sizes and Standard Configurations
Browse standard pulley configurations by family. Every product page includes designation references, dimensions, bore details and a direct WhatsApp enquiry path. Live stock confirmation is always required before order.
V-Belt & Taper-Lock Pulleys
SPZ, SPA, SPB and SPC pulley combinations for wedge-belt drives.
| Designation | Profile | Pitch / OD | Grooves | Bush / max bore | Product page |
|---|---|---|---|---|---|
| SPA 80-2 / 1210 | SPA / 13 mm wedge V-belt | 80 mm / 86 mm | 2 | 1210 / 25 mm | View specifications ↗ |
| SPA 100-2 / 1610 | SPA / 13 mm wedge V-belt | 100 mm / 106 mm | 2 | 1610 / 42 mm | View specifications ↗ |
| SPA 140-3 / 2012 | SPA / 13 mm wedge V-belt | 140 mm / 146 mm | 3 | 2012 / 50 mm | View specifications ↗ |
| SPB 125-2 / 1610 | SPB / 17 mm wedge V-belt | 125 mm / 133 mm | 2 | 1610 / 42 mm | View specifications ↗ |
| SPB 160-3 / 2012 | SPB / 17 mm wedge V-belt | 160 mm / 168 mm | 3 | 2012 / 50 mm | View specifications ↗ |
| SPB 200-4 / 2517 | SPB / 17 mm wedge V-belt | 200 mm / 208 mm | 4 | 2517 / 60 mm | View specifications ↗ |
| SPC 224-2 / 2517 | SPC / 22 mm wedge V-belt | 224 mm / 234 mm | 2 | 2517 / 60 mm | View specifications ↗ |
| SPC 315-3 / 3020 | SPC / 22 mm wedge V-belt | 315 mm / 325 mm | 3 | 3020 / 75 mm | View specifications ↗ |
Timing Belt Pulleys
Toothed HTD timing pulleys for synchronous drive applications.
| Designation | Profile | Pitch / OD | Grooves | Bush / max bore | Product page |
|---|---|---|---|---|---|
| 20-5M-15 | HTD 5M timing belt | 31.83 mm / 30.0 mm nominal | 20 teeth | Not applicable to this design (pilot bore) / Pilot bore; machining confirmation required | View specifications ↗ |
| 30-5M-25 | HTD 5M timing belt | 47.75 mm / 45.9 mm nominal | 30 teeth | Not applicable to this design (pilot bore) / Pilot bore; machining confirmation required | View specifications ↗ |
| 20-8M-30 / 1610 | HTD 8M timing belt | 50.93 mm / 48.9 mm nominal | 20 teeth | 1610 / 42 mm | View specifications ↗ |
| 30-8M-30 / 2012 | HTD 8M timing belt | 76.39 mm / 74.4 mm nominal | 30 teeth | 2012 / 50 mm | View specifications ↗ |
| 40-8M-50 / 2517 | HTD 8M timing belt | 101.86 mm / 99.9 mm nominal | 40 teeth | 2517 / 60 mm | View specifications ↗ |
Poly-V Pulleys
Multi-rib PJ and PL pulley sizes for compact, high-speed drives.
| Designation | Profile | Pitch / OD | Grooves | Bush / max bore | Product page |
|---|---|---|---|---|---|
| 4 PJ 50 / 1210 | PJ poly-V / multi-rib belt | 50 mm nominal / 52.5 mm nominal | 4 ribs | 1210 / 25 mm | View specifications ↗ |
| 6 PJ 63 / 1610 | PJ poly-V / multi-rib belt | 63 mm nominal / 65.5 mm nominal | 6 ribs | 1610 / 42 mm | View specifications ↗ |
| 8 PJ 80 / 1610 | PJ poly-V / multi-rib belt | 80 mm nominal / 82.5 mm nominal | 8 ribs | 1610 / 42 mm | View specifications ↗ |
| 6 PL 100 / 2012 | PL poly-V / multi-rib belt | 100 mm nominal / 103 mm nominal | 6 ribs | 2012 / 50 mm | View specifications ↗ |
Idler & Guide Pulleys
Flat, crowned and grooved guide pulleys for routing and tensioning.
| Designation | Profile | Pitch / OD | Grooves | Bush / max bore | Product page |
|---|---|---|---|---|---|
| Flat Idler 50 x 10 | Flat belt or belt back-side guide | Not applicable to this design / 50 mm | Not applicable to this design (flat face) | Not applicable to this design (bearing-mounted) / 10 mm bearing bore | View specifications ↗ |
| Flat Idler 75 x 15 | Flat belt or belt back-side guide | Not applicable to this design / 75 mm | Not applicable to this design (flat face) | Not applicable to this design (bearing-mounted) / 15 mm bearing bore | View specifications ↗ |
| Crowned Idler 100 x 20 | Flat belt or belt back-side guide | Not applicable to this design / 100 mm | Not applicable to this design (crowned face) | Not applicable to this design (bearing-mounted) / 20 mm bearing bore | View specifications ↗ |
| SPA 100-1 Guide Idler | SPA / 13 mm wedge V-belt | 100 mm / 106 mm | 1 | Not applicable to this design (bearing-mounted) / 20 mm bearing bore | View specifications ↗ |
Buyer Guidance
How to Select a Pulley
- Choose pulley diameter and profile to meet speed ratio and belt speed limits.
- Match belt profile and pitch exactly to avoid slip, noise, or premature wear.
- Confirm load, RPM, and duty cycle to select material and balance grade.
- Check alignment and shaft fit; taper lock improves concentricity and serviceability.
- Avoid common errors: wrong profile, missing groove count, or incorrect bore/keyway.
RFQ & Sourcing Process
RFQ & Sourcing Process
Our sourcing workflow focuses on verification before supply to reduce rework.
- Dimension and profile verification (OD, pitch, grooves, face width, bore).
- Belt compatibility cross-checks against profile, pitch, and drive geometry.
- Brand or equivalent sourcing options to balance lead time and budget.
- Clear lead times for stock items versus project or machined supply.
Why Buy from Myra Trading
Why Buy from Myra Trading
- UAE-based sourcing with fast access to GCC inventory.
- Multi-brand access for standard and specialized pulley profiles.
- Engineering-assisted selection for correct fit and belt life.
- Experience supporting project supply and MRO requirements.
Request a Quote
Request a Quote
Share pulley type, profile, and dimensions to speed up specification checks and response time.
Send These Details for the Fastest Quote
- SPA, 2 groove, OD 160mm, TL 3020, bore 45mm
- SPB, 3 groove, OD 224mm, pilot bore
- HTD 8M, 32 teeth, 25mm face, pilot bore
- Poly-V K profile, 6 ribs, OD 120mm, bore 30mm
Related Categories & Resources